Titanium Alloy Forgings

Takaitaccen Bayani:


  • Abu:Gr1, Gr2, Gr3, Gr7, Gr9, Gr11, Gr12, Gr16
  • Girman Disk:Dia≤3000mm, Thk≥10mm
  • Girman zobe:OD≤3000mm, Tsayi/Thk≥10mm
  • Flanges, Shaft, da dai sauransu:Girman Al'ada
  • Filin Aikace-aikace:Duk filin masana'antu, ciki har da Aerospace, jirgin sama, Marine, Soja, da dai sauransu.
  • An Samar da Gwajin Dubawa:Binciken Haɗin Sinadarai, Gwajin Kayan Injini, Gwajin Tensile, Gwajin Flaring, Gwajin Flattening, Gwajin NDT, Gwajin Eddy-Yanzu, Gwajin UT/RT, da sauransu.
  • Lokacin Jagora:Gaba ɗaya lokacin jagoran shine kwanaki 30.Duk da haka, ya dogara da adadin odar bisa yarda
  • Sharuɗɗan Biyan kuɗi:Kamar yadda aka amince
  • Shiryawa:Dace Kunshin Case na Plywood na dogon lokaci mai dacewa ko jigilar iska.
  • Port of loading:Dalian, Qingdao, Tianjin, Shanghai, Ningbo, da dai sauransu, bisa ga Buƙatun Abokan ciniki.
  • Cikakken Bayani

    Bidiyo

    Tags samfurin

    Titanium da Titanium Alloy Forgings

    Titanium da titanium alloys suna da fa'idodin ƙarancin ƙima, ƙayyadaddun ƙarfi na musamman da juriya mai kyau, kuma ana amfani da su sosai a fannoni daban-daban.

    Ƙirƙirar titanium wata hanya ce ta ƙirƙira wacce ke amfani da ƙarfi na waje zuwa ɓangarorin ƙarfe na titanium (Ban da faranti) don samar da nakasar filastik, canza girma, siffa, da haɓaka aiki.Ana amfani da shi don kera sassa na inji, kayan aiki, kayan aiki ko sarari.Bugu da ƙari, bisa ga tsarin motsi na maɗauri da tsarin motsi na tsaye da a kwance (Don ƙirƙira sassan siriri, lubrication da sanyaya, da ƙirƙira sassan samar da sauri), sauran hanyoyin motsi za a iya haɓaka ta hanyar. ta amfani da na'urar diyya.

    Hanyoyin da ke sama sun bambanta, kuma ƙarfin ƙirƙira da ake buƙata, tsari, ƙimar amfani da kayan aiki, fitarwa, juriyar juzu'i, da lubrication da hanyoyin sanyaya suma sun bambanta.Waɗannan abubuwan kuma sune abubuwan da ke shafar matakin sarrafa kansa.

    _20200701175436

    Ƙirƙira tsari ne na yin amfani da filastik na ƙarfe don samun tsari na ƙirƙirar filastik tare da wani nau'i da sifofi na tsarin da ba komai a ƙarƙashin tasiri ko matsa lamba na kayan aiki.Mahimmancin ƙirƙira na ƙirƙira shine cewa ba zai iya samun nau'ikan sassa na injin ba kawai, amma kuma yana haɓaka tsarin ciki na kayan aiki da haɓaka kayan aikin injiniya na sassan injin.

    22_202007011754202

    1. Kirkirar Kyauta

    Ƙirƙirar ƙirƙira gabaɗaya ana aiwatar da ita tsakanin lebur biyu ko gyaggyarawa ba tare da rami ba.Kayan aikin da aka yi amfani da su a cikin ƙirƙira kyauta suna da sauƙi a cikin siffar, sassauƙa, gajere a cikin sake zagayowar masana'antu da ƙananan farashi.Duk da haka, ƙarfin aiki yana da yawa, aikin yana da wuyar gaske, yawan aiki ba shi da yawa, ingancin kayan aikin ƙira ba shi da yawa, kuma izinin injin yana da yawa.Sabili da haka, ya dace kawai don amfani lokacin da babu buƙatu na musamman akan aikin sassan kuma adadin ƙananan ƙananan.

    2. Buɗe Die Forging (Die Forging with Burrs)

    Wurin da babu komai ya ɓata tsakanin sifofi biyu tare da zane-zane, ƙirƙirar tana kulle a cikin rami, kuma ƙarafan da ya wuce gona da iri yana fitowa daga ƙunƙun tazarar da ke tsakanin su biyun ya mutu, yana haifar da ɓarna a kusa da ƙirjin.A ƙarƙashin juriya na mold da kewaye burrs, karfe da aka tilasta da za a danna a cikin siffar mold cavity.

     

    3. Rufe ƙirƙira (Die Forging without Burrs)

    A lokacin rufaffiyar ƙirar ƙirƙira, ba a sami ɓarna mai jujjuyawa daidai da alkiblar motsin mutu ba.Ramin rufaffiyar ƙirƙira mutu yana da ayyuka guda biyu: ɗaya don ƙirƙirar fanko ne, ɗayan kuma don jagora ne.

    4. Extrusion Mutu Forging

    Yin amfani da hanyar extrusion don ƙirƙira mutu, akwai nau'ikan ƙirƙira iri biyu, extrusion gaba da baya extrusion.Extrusion mutu ƙirƙira iya kera daban-daban m da kuma m sassa, kuma zai iya samun forgings tare da high geometrical daidaici da kuma m tsarin ciki.

    88_202105131003077
    20210520114333

    5. Multi-Directional Die Forging

    Ana aiwatar da shi akan injin ƙirƙira mutun na jagora mai yawa.Baya ga naushi a tsaye da alluran toshewa, injin ɗin mutun na'ura mai nau'i-nau'i kuma yana da na'urori biyu a kwance.Hakanan ana iya amfani da mai fitar da shi don naushi.Matsin na'urar fitarwa ya fi na yau da kullun na injin lantarki.Don zama babba.A Multi-directional mutu ƙirƙira, da darjewa aiki a madadin da kuma a hade a kan workpiece daga tsaye da kuma a kwance kwatance, da kuma daya ko fiye perforation punches da ake amfani da su sa karfe ya kwarara daga waje daga tsakiyar kogon don cimma manufar ciko. rami.Babu burbushin jabu na musamman akan layin rabuwa na sassan ganga.

    6. Rarraba Forging

    Don ƙirƙira manyan ingantattun ingantattun ingantattun ingantattun matsi akan matsi na hydraulic da ke akwai, ana iya amfani da hanyoyin ƙirƙira ɓangarori na mutuƙar ƙirƙira irin su ƙirƙirar ƙirƙirar kashi da farantin shim mutu ƙirƙira.Siffar hanyar ƙirar ƙirƙira ta ɓarna ita ce aiwatar da ƙirƙira yanki guda ɗaya, sarrafa sashe ɗaya a lokaci guda, don haka ton kayan aikin da ake buƙata na iya zama ƙanƙanta.Gabaɗaya magana, ana iya amfani da wannan hanyar don aiwatar da manyan juzu'i a kan matsi na ruwa masu matsakaicin girma.

    7. Isothermal Die Forging

    Kafin yin ƙirƙira, ana yin zafi da ƙirƙira zuwa zafin ƙirƙira na blank, kuma zafin jiki na ƙirƙira da blank ɗin ya kasance iri ɗaya a cikin tsarin ƙirƙira, ta yadda za a iya samun babban adadin nakasar a ƙarƙashin aikin ɗan ƙaramin ƙarfi. .Isothermal die forging da isothermal superplastic die forging sun yi kama da juna, bambancin shi ne cewa kafin ya mutu, ana bukatar a sanya blank ɗin superplasticized [i] don ya zama yana da daidaitattun hatsi [ii].

     

    Titanium alloy ƙirƙira tsari da ake amfani da ko'ina a cikin jirgin sama da kuma Aerospace masana'antu (Isothermal Die Forging Processan yi amfani da shi wajen kera sassan injina da sassan tsarin jirgin sama), kuma yana ƙara yin fice a sassan masana'antu kamar motoci, wutar lantarki, da jiragen ruwa.

    A halin yanzu, farashin amfani da kayan titanium yana da tsada sosai, kuma yawancin filayen farar hula ba su da cikakkiyar masaniyar laya ta gami da titanium.Tare da ci gaba da ci gaban kimiyya, shirye-shiryen fasahar samfurin titanium da titanium zai zama mafi sauƙi kuma farashin sarrafawa zai kasance ƙasa da ƙasa, kuma za a ba da fifikon fara'a na titanium da titanium gami a cikin fa'idodi da yawa.

    UsiHanyar extrusion don ƙirƙira ƙirƙira, akwai nau'ikan ƙirƙira nau'ikan ƙirƙira guda biyu, Extrusion Gaba da Reverse Extrusion.Extrusion Die Forging na iya kera sassa daban-daban masu fa'ida da ƙarfi, kuma yana iya samun ƙirƙira tare da madaidaicin juzu'i da tsarin ciki mai zurfi.

    Babban Hoto
    QQ20210520114638
    QQ20210520114914
    123243

    BMT an ƙera shi a cikin samar da ƙirƙirar ƙirƙira ta titanium mai ƙirƙira da ƙirƙirar ƙirar titanium wanda ke nuna kyakkyawan ƙarfin injin, ƙarfin hali, juriya na lalata, ƙarancin ƙima da babban ƙarfi.BMT titanium kayayyakin 'daidaitaccen samarwa da tsarin ganowa sun shawo kan rikice-rikicen fasaha da wahalar injin ƙirƙira na masana'antar titanium.

    The high quality madaidaicin titanium ƙirƙira samar dogara ne a kan fitar da ƙwararrun tsari zane da kuma a hankali ci gaba hanya.BMT titanium ƙirƙira za a iya amfani da kewayo daga kananan kwarangwal goyon bayan tsarin zuwa babban size titanium ƙirƙira na jiragen sama.

    BMT titanium forgings ana amfani da ko'ina a yawancin masana'antu, kamar sararin samaniya, aikin injiniya na teku, mai da gas, wasanni, abinci, mota, da dai sauransu. Ƙarfin samar da mu na shekara-shekara ya kai ton 10,000.

    Tsawon girman:

    6

    Samfuran Haɗin Sinadarin Kayan Abu

    7

    Samfuran Haɗin Sinadarin Kayan Abu

    8

    Gwajin dubawa:

    • Binciken Haɗin Halitta
    • Gwajin Kayayyakin Injini
    • Gwajin tensile
    • Gwajin Walƙiya
    • Gwajin Lalacewa
    • Lankwasawa Gwajin
    • Gwajin Hydro-Static
    • Gwajin huhu (Gwajin hawan iska a ƙarƙashin ruwa)
    • Gwajin NDT
    • Gwajin Eddy-Yanzu
    • Gwajin Ultrasonic
    • Gwajin LDP
    • Gwajin Ferroxyl

    Yawan aiki (Max da Min adadin oda):Unlimited, bisa ga tsari.

    Lokacin Jagora:Gaba ɗaya lokacin jagoran shine kwanaki 30.Duk da haka, ya dogara da adadin odar bisa yarda.

    Sufuri:Babban hanyar sufuri ita ce ta Teku, ta Air, ta Express, ta Train, wanda abokan ciniki za su zaɓa.

    Shiryawa:

    • Ƙarshen bututu don a kiyaye shi da filaye ko kwali.
    • Duk kayan aikin da za'a shirya don kare iyaka da fuskantar.
    • Duk sauran kayayyaki za a cika su ta hanyar kumfa mai kumfa da marufi masu alaƙa da filastik da lamunin plywood.
    • Duk wani itace da aka yi amfani da shi don tattarawa dole ne ya dace don hana gurɓatawa ta hanyar tuntuɓar kayan aiki.
    微信图片_20200708102746
    微信图片_202009241247193
    微信图片_20200708102745
    微信图片_202007081027461
    包装1
    微信图片_202009241247194

  • Na baya:
  • Na gaba:

  • Aiko mana da sakon ku:

    Ku rubuta sakonku anan ku aiko mana

    Aiko mana da sakon ku:

    Ku rubuta sakonku anan ku aiko mana